12x10 & 12x12 eCONO Apex Shelter
FITTING INSTRUCTIONS
Fit left & right-hand gable ends to the top of side walls
(the block fixed to the underside of the gable end needs to butt up to the shelter wall).
Fix the gables in position temporarily using 100mm screws, once you are happy with the position fix using 3 x M8 x100mm coach screws and
washers from the underside of the top rail of the sidewall up and into the uprights on the gable ends.
The gable end bottom shiplap board oversails the
bottom timber and when in position the oversail
shiplap needs to be nailed to the side panel.Using the
40mm nails provided fix the bottom shiplap board of
the gable ends to the upright timbers of the side walls
