Walford Timber Premier Sheds – Assembly Instructions
Due to the heavy duty construction of the Walford Timber Premier Shed range, we recommend at least two
people for its construction.
You will need:
Battery operated drill with pozi screwdriver attachment
Hammer
Stanley knife (for cutting shed felt)
Set square
1. Ensure you have a solid and level base to situate your shed (such as a concrete pad). Please note that the
shed is unlikely to fit together properly if the base is not level, particularly when you come to fit the roof.
2. Place the back panel on the floor panel of the shed. This is usually the blank gable. The frame of the back
panel should sit on the floor panel with the cladding left over hanging the side.
3. Have your assistant hold the first panel in place while a side panel is butted up against it forming a corner.
4. Screw through the corner battens on the panels to secure the two pieces together. Do not screw to the
floor yet.
