11. Roll the felt out along the length of the roof to gauge the required length. Leave approx. 50mm overhang
on either end of the felt. Once the length has been determined, use your first piece as a template to cut the
remaining pieces required to cover the roof. Felt should be fixed using clout nails supplied at
approximately 100mm centres, starting with the lower felt sections first working your way up to the apex.
We recommend a overlap of approx. 150mm when overlapping felt sheets.
12. Take the four 19x65mm corner cover strips supplied and nail them to the exposed external corners of the
shed.
13. Fit the hinges and latch supplied to the door. Have your assistant hold the door in position while you screw
it to the shed. Walford Timber Premier Shed doors can be hung as left hand or right hand opening.
14. Take the 25x100mm fascia pieces supplied and fit them to the gable ends of the shed making sure the felt
is tucked and secured neatly behind it. Pre-drill the diamond finials and nail or screw them on to the apex
of the fascias.
15. Fit the glass from the inside of the shed fixing the battens to the inside of the frame. Do not fit the battens
too tight or the glass will crack. We recommend that gloves are used when handling glass to avoid injury.
