Hawking HWRN1A, Руководство пользователя

Страница: 70 / 138

61
access point. Click ‘Select Site Survey’ button, then
a “Wireless Site Survey Table” will pop up. It will
list all available access points near by. You can
select one access point in the table and it will join
wireless LAN through this access point.
WLAN MAC (5):
For some applications, you may need to designate a
specific MAC address for the router. Please enter
the MAC address here. If you are connecting the
router to a computer, you can simply press ‘Clone
Mac address’ button to fill the MAC address field
with the MAC address of your computer.
2-7-1-3 Setup procedure for ‘AP Bridge-Point to Point’:
In this mode, you can connect your wireless router with another, to
combine two access points and expand the scope of wireless network, and
all clients (wired only – AP will not accept wireless clients in this mode)
of two wireless routers will think they’re on the same physical network.
This function is very convenient when you need to connect two networks
between two buildings. Here are instructions about how to connect two
wireless routers together:
NOTE: Two wireless routers must use the same mode, band, channel
number, and security setting!
1
2
3
4
5