Instructions Manual
High-pressure piston pumps - XLT/XLTI ATEX series
Cod. doc.
M.I.01
Rev.
0
Page 29 of 32
This Manual is the property of the Manufacturer; any reproduction in any form, even partial, is prohibited.
Short bearing life
Pump-motor connection problems
Check the status of the keys, flexible coupling or
pulley
The oil has not been changed regularly
Change the oil as instructed in the maintenance
manual for the pump
Excessive pressure of the pumped water
Check the pressure
8
DISMANTLING AND DISPOSURE
Contact the Manufacturer directly for the relative information and instructions if the pump is to be
dismantled so it can be moved or disposed of.
The pump should be taken to a specialised centre for disposal according to current legislation concerning occupational hazards.
All parts should be separated after removal based on the materials they consist of. Do not discard materials that are harmful for
the environment, such as gaskets and lubricants, together with normal waste.
Non ferrous parts in particular should be taken to authorised firms for their correct disposal. Ferrous parts may be sold and used
again.
Always inform the manufacturer if the machine is to be sold or will go out of service.
The packing materials can be recycled. Do not dispose of packing materials with normal household waste: take it to a centre for
recycling.
The pump contains materials that can be recycled and which should be taken to a recycling centre.
Dispose of the oil correctly.
Send the pump to a specialised recycling centre for disposal.
9
SPARE PARTS
Always use original spare parts (Annex II).
10 ANNEXES
1.
Declaration of Conformity (
www.hawkpumps.com
)
2.
Technical specification (
www.hawkpumps.com
)
3.
Coupling systems
