Instructions Manual
High-pressure piston pumps
XLT IEX – XLT HT IEX series
Cod. doc. M.I.XLTIEX-XLTHTIEX
Rev.
0
Page 10 of 32
This Manual is the property of the Manufacturer; any reproduction in any form, even partial, is prohibited.
The level of noise measured is less than the minimum level allowed by current legislation.
2.5
High temperatures
Mechanical parts are lubricated to prevent the possibility of overheating due to friction over a long period of time. The choice of
lubricating oil, indicated later in this manual, complies with the Atex classification of the pumps. Furthermore, if the normal
maintenance procedures are followed, this should not represent a risk.
Machine operators should use appropriate safety equipment provided, such as gloves and overalls.
2.6
Stability
The XLT IEX – XLTI HT IEX series of pumps are supplied with the necessary instructions to guarantee a stable and safe assembly in
the machine/system that will incorporate them. The person in charge of their assembly/operation must follow and comply with
these instructions.
It was designed and built to ensure it does not present any form of risk in terms of its stability in conditions of normal use.
More information in section 5: “Installation”
2.7
Pressurised fluids
The pumps described in this manual are built with suitable materials to ensure they will tolerate the envisaged operating
pressures. They are also fitted with all the necessary parts (caps, valves, plungers, etc..) to ensure correct operation and
circulation of the envisaged fluids (water and lubricating oil). The transmission lubricating products in the pump body are
necessary to safeguard correct operation by keeping the mechanical parts lubricated.
