7
ASSEMBLY
OPERATION
ENGLISH
The trimmer must be used outdoors only, at an ambient temperature between
0ºC and 45ºC.
Switch On/Off
To switch the grass trimmer ON, squeeze the on/off switch, to switch the grass
trimmer off, release the on/off switch.
1. Unplug the tool.
2. Remove the screw from the motor housing
3. Put guard in direction of arrow to align with screw hole.
4. Firmly press the guard into place.
5. Secure the guard with screw. Never use the tool unless the guard is properly
fitted.
Assemble the safety guard(Fig.6)
N
O.
!
WARNING!
The guard must be properly installed. The guard provides partial
protection from the risk of thrown objects to the operator and others.
N
O.
!
WARNING!
Never use steel wire, rope, string, or other materials as cutting line,
which can break off and become a dangerous projectile.
N
O.
!
WARNING!
The cutting head continues to rotate after the trimmer has
been switched off, wait until it has stopped then lay down the tool.
N
O.
!
WARNING!
Remove stones, loose pieces of wood and other objects from the
cutting area. The blade continues to rotate for a few seconds after the grass trimmer
is switched off. Allow the motor/blade to stop rotating before switching on again.
Do not rapidly switch off and on.
N
O.
!
NOTE:
If guard is not properly installed, damage to unit (including motor failure)
will result.
Fig.6
