10
OPERATION
ENGLISH
MAINTENANCE
The grass trimmer comes with a full line spool. The line wears down during
work. To feed in new line, switch the machine on and press the head of the
spool firmly against the ground. The line will automatically be released by the
centrifugal force. The trimmer line will be cut to the right length by the blade
on the lime cover.
To increase line length
1) Move the grass trimmer left and right, keeping it well away from the body. The
trimmer can efficiently cut grass up to a height of 15cm. Cut higher grass in
stages.
2) When using the trimmer hold at an angle of about 20°to the ground (Fig. 17)
and swing the trimmer from side to side. (Fig.17)
Do not overload the trimmer - cut in small sections, which will greatly improve
efficiency by keeping the trimmer running at a high speed. (Fig.18)
Cutting grass
N
O.
!
WARNING!
Always wear protective gloves during maintenance operations.
Do not carry out maintenance when the engine is running or hot.
N
O.
!
WARNING!
Use only original manufacturer's replacement parts, accessories and
attachments. Failure to do so can cause possible injury and poor performance.
Fig.17
Fig.18
• Before conducting any maintenance make sure the trimmer is unplugged.
• Only the maintenance operations described in this manual may be carried out
by the user. Any other tasks must be completed by a specialist.
• Check all screws regularly to ensure that they sit tight.
• Only use original replacement parts. Only these spare parts are designed and
suitable for the device. Other replacement parts will not only lead to an
invalidation of the warranty, they may also endanger you and your
environment.
