Haulotte HA 41 PX, Инструкция по эксплуатации и техническому обслуживанию

Страница: 35 / 82

Operation and Maintenance
23
Caution !
Caution !
Caution !
Caution !
4 -
USE
4.1 - SAFETY MEASURES
To prevent use of the machine over and above its limits, safety measures
are provided in order to protect personnel and the machine.
WHEN THE MACHINE IS DEPLOYED, IT MUST ALWAYS
REMAIN ON POWER SO THAT THE SAFETY SYSTEMS
ARE ACTIVE.
These immobilise the machine,
modify or disable its movements.
In this case, insufficient knowledge of the characteristics and operation of
the machine can make one believe there is a breakdown whereas it is a
correct operation of the safety measures. It is thus essential to read and
understand all of the instructions of the following chapters.
4.1.1 - Displacement (controlled from the platform panel)
Do not carry out operations before
having read and understood the
instructions in chap. 4.3, page 26.
To move the machine, it is necessary to activate the "dead man" safety by
keeping your foot pressed on the pedal.
NOTE : If the user presses the pedal for more than 8 seconds without
making any movement, the system will become inoperative. It
is then necessary to release the pedal and press it again.
• The release of the "dead man" pedal causes any lateral movement to
stop.
• Lateral movement is possible with the machine unfolded on a level
area only (or a slope lower than 4°).
During lateral movement,
movements such as raising the fly
jib, raising the arm or turning the
turret are not possible.
NOTE : The high and low speed of lateral movement are only possible
if the telescope is retracted and the fly jib lowered to its hori-
zontal position. Otherwise, its micro speed is automatically
selected.
It is forbidden to drive on the public
highway.
• Firmly adhere to traffic regulations and instructions in working areas.
• On rough ground, make a preliminary reconnaissance of the area be-
fore beginning work at height
• always drive while maintaining a sufficient distance from unstable ed-
ges or slope
• make sure that nobody is in immediate vicinity of the machine before
carrying out a movement or displacement.
4.1.2 - Filling the fuel tank
• Before any filling operation, make sure that the fuel is clearly what re-
commended and that it is properly stored in order not to be polluted