Haulotte H12 SD, Инструкция по эксплуатации и техническому обслуживанию

Страница: 30 / 55

29
4.5. OPERATING INSTRUCTIONS.
IMPORTANT: Machine must only be operated when
all checks have been completed.
After use, always set cut-out (item 1, photo 7) to OFF.
1
2
Photo 7 : Engine start battery.
4.5.1. Operation from ground.
Starting the engine
•
Check that the battery cut-out is in working position. (photo 7, item 1)
•
Check that emergency stop button on ground control panel (item 9, photo 1) is unlocked. If necessary
work it using the ignition key.
•
Check that emergency stop button on platform control panel (item 9, photo 2) is unlocked. . If necessary
work it using the ignition key.
•
The three lights (photo 1, items 1-2-3) should come on.
•
Press start button (photo 1, item 8). Once the engine is running, release button. the three lights should go
out.
NOTICE
Do not use ignition aid products.
Let the engine run for several minutes before loading the platform.
NOTE:
•
If the engine does not start, cut the contact and repeat the operation. Check that the two emergency stop
buttons are unlocked.
•
Never actuate the start button for more than 10-15 seconds.
•
Press the emergency stop button to turn the engine off, and disables the platform controls. To use these
controls again, unlock the button.
•
During platform use, use the platform controls to start and stop the engine.
4.5.2. Operation from platform.
First, check that:
•
battery cut-out is in working position. (photo 7, item 1)
•
the 4 cylinders are fully extended or retracted (stabilistation option only).
•
platform load respects the maximum load allowance and is well distributed.