HAUBER-Elektronik GmbH
11
13
Functional Description
The housing cover may only be unscrewed, if the Type 663-Window is either seperated
from the mains or no explosion endangered atmosphere exists. Otherwise danger of
explosion because of sparkling, when the ATEX-certified Type 663-Window is operating in
explosion endangered areas!
The Type 663-Window is applied for the detection of vibration-acceleration. If the value of the
acceleration is below or above an adjustable window-range, an alarm is generated. The sensor
contains two independent channels - LIM1 and LIM2. The lower limit of the window-range will
be adjusted with LIM1 and the upper limit with LIM2 (see diagram).
Settings
?
Turn-switch
?
TIME Potentiometer :
Adjustment of the delay-time, without steps, 0...30 sec.
Operating conditions
?
Green OK-LED:
The acceleration-value moves within the window-range.
?
Yellow WARNING-LED:
The acceleration-value has exceeded the window-range,
and the delay-time of the alarm is running.
?
Red ALARM-LED:
The acceleration-value has exceeded the window-range,
and the delay-time of the alarm has expired.
SET
:
Adjustment of the limit in 15 steps (see table, page 12).
Operator’s controls
Measuring range: 0...4 g
Limit LIM1 = 1,25 g
Limit LIM2 = 2,75 g
Window range: 1,25...2,75 g
Example Adjustment Window-range
g
1
2
3
4
LIM1
LIM2
Window-range
ALARM
ALARM
汉矢德传感器（上海）有限公司
T
：
150 210 98804 www.hauber-elektronik.cn
