Hatz 3L43C Скачать руководство пользователя страница 90

Страница: 90 / 104

Faults

3-4L43C, 3-4M43, 3-4M43Z

HATZ

Manual

The engine starts, but does not continue running after the starter is
switched off.

Possible causes

Remedy

Chapter

Machine is not uncou-
pled.

If possible, separate the engine
from the machine by uncou-
pling it.

Fuel prefilter is
clogged.

Change the fuel prefilter.

8.2.9 Changing
the fuel prefilter,
page 63

Main fuel filter is
clogged.

Change the main fuel filter

8.2.14 Change
the main fuel fil-
ter, page 73

Fuel supply is inter-
rupted.

Systematically check the entire
fuel supply.

Stop signal from monitoring elements that are associated with the au-
tomatic switch-off (optional):

▪ No oil pressure.

Check the oil level.

7.8 Checking the
oil level and
adding oil if nec-
essary, page 43

▪ Faulty three phase

alternator.

Contact Hatz service.

Engine switches off spontaneously during operation.

Possible causes

Remedy

Chapter

The tank ran out of fuel
during operation.

Fill with fuel.

7.6 Refueling,
page 41

Fuel prefilter or main
fuel filter is clogged.

Change the fuel filter.

8.2.9 Changing
the fuel prefilter,
page 63

8.2.14 Change
the main fuel fil-
ter, page 73

Poly v belt torn.

Renew the poly v belt.

8.2.15 Renewing
the poly v belt
and checking the
function of the
switch-off unit,
page 76

Mechanical faults.

Contact Hatz service.

Содержание 3L43C









































































































Результаты поиска

Содержание 3L43C

Отзывы:

Бренды по названию

Популярные бренды

Hatz 3L43C, Руководство пользователя

Результаты поиска

Содержание 3L43C

Отзывы:

Бренды по названию

Популярные бренды