Hatz 3L43C Скачать руководство пользователя страница 73

Страница: 73 / 104

3-4L43C, 3-4M43, 3-4M43Z

Maintenance

HATZ

Manual

Step

Activity

Wipe spilled engine oil out of the oil baffle.

Lightly oil the gasket (3) of the new oil filter.

Screw in the oil filter and tighten it by hand.

Add engine oil to the

max.

mark on the dipstick.

▪ For the specification and viscosity, see chapter

4.3 Engine oil,

page 24

▪ The mark on the dipstick indicates whether the engine is

equipped

with

an oil sump or

not

(see chapter

4.1 Engine in-

formation and filling quantities, page 22

Reinsert the dipstick.

Check the oil level after a short test run and correct if necessary.

Check the oil filter for tightness and retighten by hand if neces-
sary.

8.2.14 Change the main fuel filter

Safety notes

DANGER

Fire hazard from fuel

Leaked or spilled fuel can ignite on hot engine parts and cause
serious burn injuries.

▪

Do not spill fuel.

▪

No open flames when working on the fuel system.

▪

Do not smoke.

CAUTION

Danger of injury

Repeated contact with diesel fuel can cause chapped and
cracked skin.

▪

Wear safety gloves.

Содержание 3L43C









































































































Результаты поиска

Содержание 3L43C

Отзывы:

Бренды по названию

Популярные бренды

Hatz 3L43C, Руководство пользователя

Результаты поиска

Содержание 3L43C

Отзывы:

Бренды по названию

Популярные бренды