Hatz 3L43C Скачать руководство пользователя страница 49

Страница: 49 / 104

3-4L43C, 3-4M43, 3-4M43Z

Maintenance

HATZ

Manual

▪ For engines with an electric starter: Disconnect the negative battery termi-

nal before carrying out maintenance work.

Performance of maintenance work

The entire machine is designed to be maintenance friendly. Parts that re-
quire maintenance are easily accessible.

▪ Perform maintenance work faithfully at the specified intervals to prevent

premature wear of the machine.

▪ Follow the notice and warning labels on the machine.

▪ Always retighten screw connections loosened during maintenance work.

▪ After the necessary maintenance and repair work is completed, perform a

function test (test run).

▪ For maintenance work that is not listed and described in the maintenance

documentation, please contact your nearest

HATZ service station

8.2

Maintenance work

Safety note

CAUTION

Danger of injury if maintenance instructions are not fol-
lowed.

▪

Only perform maintenance when the engine is switched off.

▪

Protect start-up devices (crank handle, recoil start or start-
ing key) from unauthorized access.

▪

For engines with a starter: Disconnect the negative battery
terminal.

▪

When the maintenance work has been completed, ensure
that all tools are removed from the machine.

8.2.1

Maintenance notice label

NOTICE

Depending on the engine type, one of the maintenance plans
shown below is supplied with the engine.

▪

It should be mounted on the engine or machine in a clearly
visible location.

▪

The maintenance intervals specified on the maintenance
plan must be adhered to (see chapter

8.2.2 Maintenance

plan, page 51

)

Содержание 3L43C









































































































Результаты поиска

Содержание 3L43C

Отзывы:

Бренды по названию

Популярные бренды

Hatz 3L43C, Руководство пользователя

Результаты поиска

Содержание 3L43C

Отзывы:

Бренды по названию

Популярные бренды