Hatz 3L43C Скачать руководство пользователя страница 14

Страница: 14 / 104

Safety

3-4L43C, 3-4M43, 3-4M43Z

HATZ

Manual

General safety instructions

DANGER

Danger to life and danger of injury due to failure to follow
the warnings on the machine and in this manual.

▪

Heed the warnings on the machine and in this manual.

WARNING

Danger of injury and danger of incorrect operation due to
inadequate personnel qualifications.

▪

The personnel must have read and understood this manual
or must possess the qualifications necessary for working
with this equipment, acquired in training/instructional cour-
ses.

▪

Only qualified personnel is permitted to operate and main-
tain this machine.

▪

Failure to comply will cause the warranty to become void.

WARNING

Danger of injury from failure to follow the operating instruc-
tions and from performing unauthorized tasks on the ma-
chine.

▪

Follow all instructions.

▪

Do not perform activities for which no qualification is avail-
able. Contact properly trained personnel if necessary.

CAUTION

Danger of injury from overloading the body.

Lifting the machine to transport it or to move it to another loca-
tion can lead to injuries (of the back, for example).

▪

Only lift the machine with a hoist (see chapter

6.1 Transport,

page 30

Содержание 3L43C









































































































Результаты поиска

Содержание 3L43C

Отзывы:

Бренды по названию

Популярные бренды

Hatz 3L43C, Руководство пользователя

Результаты поиска

Содержание 3L43C

Отзывы:

Бренды по названию

Популярные бренды