manualshive.com logo in svg

Hatz 3L43C, Руководство пользователя

Поделиться
Скачать
Hatz 3L43C Скачать руководство пользователя страница 62

Maintenance

3-4L43C, 3-4M43, 3-4M43Z

62

HATZ

Manual

Step

Activity

6

Determine the cause of the oil contamination and have leaks
corrected by the 

HATZ service station

.

7

Mount the capsule and air guide parts again.

8

Let the engine run warm to prevent rust formation.

8.2.8

Checking the screw connections

Safety note

NOTICE

i

▪

Do not retighten the screws for attaching the cylinder head.

▪

The adjustment screws on the speed governor and the in-
jection system are secured with locking varnish and are not
permitted to be tightened or adjusted.

▪

Only retighten loose screw connections. Screw connections
can be secured with thread locking adhesive or tightened to
a defined torque. Retightening tight screw connections can
cause damage.

Procedure

Step

Activity

1

Check the condition of all screw connections and ensure that
they are tight (for exceptions, see note).

2

Tighten any lose screw connections.

Содержание 3L43C









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды