Fuel tank LOW
If the fuel tank is located at an even lower level,
a manual fuel pump or an electrical supply pump
must be used for bleeding.
Models with manual fuel pump
15
– Place a suitable vessel under the filter to trap
escaping fuel.
– Open the vent screw
1
by approx. one turn.
16
– Compress and release rubber ball repeatedly,
until fuel escapes from the vent screw
1
.
– Close vent screw
1
,
then
actuate rubber ball
another two times
.
1
– Start the engine as described in Chapter 4.2.
Models with electrical supply pump
– With this model, first turn the starter key to
position I
and wait for approx. one minute,
Chapter 4.2.2. During this waiting time, the
fuel system is largely bled by means of the
electrical supply pump.
– Start the engine as described in Chapter 4.2.
4.2.
Starting the engine
Do not run the engine in closed or in-
sufficiently ventilated rooms – danger
of poisoning ! Before the engine is started, al-
ways make sure that nobody is in the danger
area (moving parts on engine or machinery)
and that all safety guards are in place.
17
Never use any spray starting aids.
050 145 00
18
