3.2.
Transport
5
Watch out for the eyebolt securing
points.
The eyebolts are used to safely transport the
engine incl. the optional equipment.
They are not suited and not approved for
hoisting complete machines.
6
Make sure that only suitable hoisting
equipment with a sufficient lifting ca-
pacity is used for transport !
3.3.
Instructions for installation
The „Manual for Selection and Installation of En-
gines“ contains all the information you need if
your engine has not yet been installed on or in
the equipment it is intended to drive, or set up in
its correct operating position. You can obtain a
copy of this manual from your nearest HATZ
service station.
7
The admissible forces and torques on
the speed adjusting lever and the stop
lever should be observed as exceeding them
can lead to damage to the stops and inner
governor parts.
3.4.
Load on engine
See supplemental information for EPA certified
engines, Page 43; resp. supplemental informa-
tion for California regulations for off road
engines, Page 57.
11
