Oil viscosity
10
Choose a viscosity according to the ambient
temperatures where the engine is to be started
from cold.
The engine must be in a horizontal position be-
fore adding oil or checking the oil level.
11
– Remove oil drain plug and pour in engine oil.
For the quantity of lubricant required, refer to
Chapter 3.1.
12
– For oil level inspection, remove the dipstick
and wipe it dry using a lint-free, clean piece of
cloth; then insert it to its stop and pull it out
again.
– Read the oil level on the dipstick; if necessary,
add oil until the level reaches the
max
. mark.
Attention !
If the engine is operated while the oil level is be-
low the
min
. mark, it will be damaged.
4.1.2. Coolant
The following radiator protection fluids have
been authorized by HATZ:
These radiator protection fluids
provide effi-
cient protection against corrosion, especially
in the case of aluminium engines, and against
freezing. Moreover, the coolant's boiling point is
essentially increased and limescale is prevented
from forming in the cooling system.
Manufacturer
Product description
BASF
Glysantin
®
G 30
TOTAL
Glacelf Plus
14
