HATO 535Y, Руководство по эксплуатации

Страница: 22 / 27

PROGRAMMING OF TRANSMITTERS
A maximum of 28 transmitters with a Keeloq dynamic code can be programmed. Each
button must be learned separately.
Hold down the LEARN button for less than
3s.
The LED will flash rapidly.
Press the transmitter button within 10
seconds.
Correct programming will be signaled by the
LED blinking three times. 2 blinks indicate
full memory. 1 blink means the end of the
learning time.
After correct programming, we have another
10s to program the other transmitters, etc.
To finish the procedure, wait 10 seconds
from the last programming or shortly press
the LEARN button. Led
will blink and the receiver will return to
normal operation.
REMOTE PROGRAMMING OF TRANSMITTERS – eLB11SZE
Remote programming of transmitters takes place when the barrier is fully open and a 4-
channel transmitter has been programmed in advance (e.g. type 4E433).
The barrier must be fully open.
OL
Hold buttons A and B of the programmed
transmitter simultaneously for approx. 5
seconds.
A B
The flashing light will turn on or, if auto-
closing is enabled, it will flash once.
OR
Release buttons A and B.
A B
Within 5 seconds, press the button of the
transmitter you want to program.
Correct programming will be signaled by the
LED indicator light blinking three times. 2
blinks indicate full memory. 1 blink means
the end of the learning time.
Validate the operation. After pressing the
programmed button, the gate should start.