12
Form No. DCSm-0214
TROUBLESHOOTING GUIDE
English
OPTIONS AND ACCESSORIES
Cutting Boards
Accessory stone cutting boards are available in various finishes
for Decorative Carving Stations models with a heated base.
Model DCSBxxx-R24-1
CBR24GGRAN
........Gray Granite
CBR24NSKy
..........Night Sky
CBR24BSAND
........Bermuda Sand
CBR24SGRASS
......Sawgrass
Model DCSBxxx-2420-1
CB2420GGRAN
......Gray Granite
CB2420NSKy
..........Night Sky
CB2420BSAND
......Bermuda Sand
CB2420SGRASS
....Sawgrass
Model DCSBxxx-3624-2
CB3624GGRAN
......Gray Granite
CB3624NSKy
..........Night Sky
CB3624BSAND
......Bermuda Sand
CB3624SGRASS
....Sawgrass
Troubleshooting Questions?
If you continue to have problems resolving an issue, please
contact the nearest Authorized Hatco Service Agency or Hatco
for assistance. To locate the nearest Service Agency, log onto
the Hatco website at
www.hatcocorp.com
and click on
Find Service Agent
, or contact the
Hatco Parts and Service
Team
at:
Telephone: 800-558-0607 or 414-671-6350
e-mail:
Fax:
800-690-2966 or 414-671-3976
Symptom
Probable Cause
Corrective Action
Base heat too low.
BASE HEAT temperature control set too
low.
Turn BASE HEAT temperature control to a
higher setting.
Excessive air movement around unit target
area.
Restrict or redirect air movement (i.e. air
conditioning duct or exhaust fan) away from
unit.
BASE HEAT temperature control is
defective.
Contact Authorized Service Agent or Hatco for
assistance.
Base heating element burned out.
Contact Authorized Service Agent or Hatco for
assistance.
Stone surface material is
stained, discolored, or has
inconsistent staining/discoloration.
Stone surface not being cleaned properly.
Clean surface using the “Cleaning the Stone
Surface” information in the mAINTENANCE
section of this manual. If these methods fail to
produce acceptable results, contact Hatco for
assistance.
This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
WARNING
ELECTRIC SHOCK HAzARD: Turn OFF power switch,
unplug power cord, and allow unit to cool before
performing any cleaning, adjustments, or maintenance.
WARNING
Содержание DCS-1 Series
Страница 27: ...Form No DCSm 0214 27 NOTES NOTAS English...
