hatch X-RAY Скачать руководство пользователя страница 42

Страница: 42 / 67

HATCH X-RAY Operating Manual

5.6.

Configuring Accessories

Depending on the type of film and cone used with the system, the console varies

the exposure duration to ensure proper exposure. Follow the procedure below to

change the cone type and film speed used.

CONFIG ACCESSORIES

Cone: short [long]
Film: [slow] fast

Save and return

Cancel

Figure 21

: Configuration

Screen

Return to Home Screen.
Press MODE key to enter Mode Selection Screen.

Scroll using the UP / DOWN keys to highlight ‘Config

Accessories’ from the list and press SET key.
Current selection of Cone type and Film speed are

indicated by surrounding it with a pair of braces [].

To change the selection, scroll to the appropriate

item and press SET key. The selection toggles

though the available options.
Once the changes are made, scroll down to ‘Save

and Return’ and press SET key. Triggering ‘Cancel’

returns to Mode Selection Screen without accepting

the changes made.

5.7. Console Events

This section describes the special events displayed in the Keypad console. For

Attention / Warning messages, refer “Table 8” and for error codes refer “Table 11”.

Figure 22 : Stand-by screen

Inactive

Absence of any activity for 5 minutes continuously

on the console causes the system to go to a state

of inactivity. This is marked by the screen indicating

a message as shown on the left side along with the

display back light driven into a ‘breathing’ state.
Press any key to bring the console back to the

Home screen.

Figure 23 : Error display

Error

Any error occurring in the system is reported by the

console as follows.
• Displays an error message with an error code

and additional messages (example code shown

is CN008).

• Display backlight turns RED
• An exposure can not be delivered until the

issue is resolved.

Содержание X-RAY




































































Результаты поиска

Содержание X-RAY

Отзывы:

Похожие инструкции для X-RAY

Бренды по названию

Популярные бренды

hatch X-RAY, Руководство по эксплуатации

Результаты поиска

Содержание X-RAY

Отзывы:

Похожие инструкции для X-RAY

Бренды по названию

Популярные бренды