hatch X-RAY Скачать руководство пользователя страница 46

Страница: 46 / 67

HATCH X-RAY Operating Manual

CHAPTER

MAINTENANCE

6.1. Cleaning and Disinfecting

NOTE

Turn OFF Hatch X-Ray Wall mount unit. Wait for 2 minutes before

proceeding with service. Active internal circuits remain connected

to main voltage even when main power switch is turned off.

CAUTION

•

Use a soft damp cloth to clean the outside surfaces of the

equipment

•

Do not spray or let the cleaning fluid enter the unit.

•

Periodic disinfecting of the unit is required for hygiene. Disinfect

with a compatible low or intermediate level instrument grade

disinfectant after cleaning.

•

Use a non-acetone based disinfectant liquid.

Cleaning Methods:

In order to ensure proper hygiene, especially when protective

barriers are not used between each patient, clean and disinfect Hatch X-Ray by

thoroughly performing the following procedures:

NOTE

Make sure that the unit is completely dry before plugging in or

turning power back on.

Exterior Surfaces:

Wipe the outside surfaces with a disposable towel moistened

with water. Dry the external surface with disposable towels.

Parts in Contact with the Patient’s Skin:

To ensure proper cleaning of these

parts, periodic disinfection with an approved EPA Non Corrosive Surface

Disinfectant is recommended. Clean any remaining disinfectant residue from the

system with a disposable towel moistened with water.

6.2. Caring for your Equipment

• Do not allow the unit to impact with any hard surfaces.
• Ensure that the control console does not fall on to hard surfaces.
•

Switch off the unit when leaving for the day or when not used for a long time.

• Ensure that the unit is not subject to direct sunlight.
• Do not force the arm mechanisms or tube head into a position it is not

designed for. There are movement stoppers provided.

• Avoid swinging the arms or rotating the tube head in a sudden jerky manner.

Содержание X-RAY




































































Результаты поиска

Содержание X-RAY

Отзывы:

hatch X-RAY, Руководство по эксплуатации, Страница: 46 / 67

Результаты поиска

Содержание X-RAY

Отзывы: