wiREVO D1000 User Manual _English Preliminary version 0.1
Before using the stereo dongle
1. Turning the stereo dongle ON/OFF
To turn on the stereo dongle, push the ON/OFF Switch ( ) to the direction for ‘ON’.
To turn off the stereo dongle, push the ON/OFF Switch ( ) to the direction for ‘OFF’.
2. Paring with a Bluetooth stereo headset
You need to pair the stereo dongle with the Bluetooth stereo headset that you intend to
use it with. This process is to set-up a unique wireless link between two devices.
Once you have paired your stereo dongle with the Bluetooth stereo headset, you don’t
need to pair it again. Once it is paired with a Bluetooth stereo headset, it will try to
connect to the Bluetooth stereo headset when you turn it on.
[When you use the stereo dongle for the first time]
It’s better to try to pair your stereo dongle with the Bluetooth stereo headset close-by.
1. If the stereo dongle is turned on for the first time, it will automatically be ready for pairing.
In this case, the blue and red indicator lights flash in turn with one another. [Pairing
mode]
2. Prepare your Bluetooth stereo headset according to its user manual on pairing.
3. The stereo dongle and stereo headset will be paired and connected automatically.
4. When pairing and connecting have been completed successfully, the blue indicator light
will flash per 6 seconds. [
Connected mode
]
[!]Note
z
The default passkey of the stereo dongle is
[0000]
.
z
To change the passkey according to your stereo headset’s one, follow the
4.
How to
change the passkey
section.
In Pairing mode, if it’s not paired for 1 minute, the indicator light will be off. In that case,
you need to turn it off and turn it on to try pairing & connecting from the first step.
[When you want to use it with another Bluetooth stereo headset]
When you want to use your stereo dongle with another Bluetooth stereo headset that
isn’t the device that you paired your stereo dongle with, you need to pair it again.
1. Switch ON ( ) with pressing and holding Menu ( ) button. In this case, the blue and red
indicator lights flash in turn with one another if it is ready to be paired. [Pairing mode]
2. The following steps are the same with
[When you use the stereo dongle for the first
time].
Date: May 18, 2006 Page 5 of 12
Hassnet Confidential Hassnet, Inc.
