Hasselblad CFV II 50C страница 112 Скачать руководство пользователя

Страница: 112 / 112

CFV II 50C USER GUIDE

www.hasselblad.com

112

APPENDIX

CONTENTS

9.4 ERROR MESSAGES

If any error message is displayed

1 Remove the components from the camera.

2 Attach the components to the camera again.

If the error message is still displayed

1 Remove the battery.

2 Wait 10 seconds.

3 Attach the battery again.

The camera processor is now reset.

If the error message is still displayed

1 Write down the error message.

2 Contact your closest authorized Hasselblad dealer.

9.5 INFORMATION ABOUT THE CFV II

50C USER GUIDE

The information in this user guide is intended for information-

al use only. The information and the 3D Product Images and

Photos, are subject to change without notice, and should not

be construed as a commitment by Victor Hasselblad AB.

UPDATES

Updates to this user guide will be issued regularly. Please

check www.hasselblad.com for the latest version. If you are

a registered user, you will get mail notifications when a new

version is available.

3D PRODUCT IMAGES

The product Images in this user guide were not taken with a

Hasselblad camera. They are produced in 3D as visualization.

They are used for illustrative purposes only and are not

intended to represent the image quality produced by Hassel-

blad cameras.

TRADEMARKS

Hasselblad, Phocus, Phocus Mobile and Phocus Mobile 2 are

trademarks of Victor Hasselblad AB.

Adobe and Adobe Photoshop are trademarks of Adobe

Systems, Inc. Macintosh, Mac OS, iPhone®, iPad® and iPod

Touch®are trademarks of Apple.

Sandisk, Panasonic, Toshiba and Sony are trademarks of their

respective corporations.

All images in this user guide, not credited to a specific

or parts of the texts, in this manual cannot be reprinted or

reused without the written express permission of Victor

Hasselblad AB.

The images in this user guide cannot be reprinted or reused

without the written express permission of the photographers

who owns the copyright.

Victor Hasselblad AB assumes no responsibility or liability for

any errors or inaccuracies that may appear in this user guide.

Victor Hasselblad AB assumes no responsibility or liability

for loss or damage incurred during, or as a result of using

Hasselblad software or products.

Содержание CFV II 50C

















































































































Результаты поиска

Содержание CFV II 50C

Отзывы:

Похожие инструкции для CFV II 50C

Бренды по названию

Популярные бренды

Hasselblad CFV II 50C, Руководство пользователя

Результаты поиска

Содержание CFV II 50C

Отзывы:

Похожие инструкции для CFV II 50C

Бренды по названию

Популярные бренды