Hase Spezialräder Pino, Руководство пользователя

Страница: 16 / 28

Gear adjustment
S P E Z I A L R Ä D E R
H
A S E
PINO
Page 16 As of 12.02
Adjusting lowest gear
-Select 9th gear on the right-hand shifter. The chain
should be on the smallest sprocket.
-Turn the crank via the pedal. If the chain already
makes a noise on the second sprocket or shifts onto
it, screw in adjusting screw 1 clockwise until the noise
stops or the chain shifts back onto the smallest
sprocket.
-Select 8th gear on the grip shifter while turning the
crank in direction of drive via the pedal.
Turn the crank in direction of drive via the pedal and
select all gears one after the other, going up the
range and back down. Adjust if necessary.
-Slowly guide the derailleur by hand back under the
smallest sprocket.
-The derailleur features an adjusting screw with which
the clearance between the jockey wheel and the
sprockets can be adjusted.
Adjustment with chain fitted and upper jockey wheel
under largest sprocket - adjust the clearance so that
when the crank is turned backwards, it is just possible
for the chain to drive without making any noise.
Pre-adjustment of derailleur
(This can be carried out easiest with the chain
removed)
-Guide the upper jockey wheel under the smallest
sprocket (and hold in place). Turn adjusting screw H
in or out until the jockey wheel is centred under the
smallest sprocket.
-Guide the upper jockey wheel under the largest sprocket (and hold in place).
Turn adjusting screw L in or out until the jockey wheel is centred under the largest
sprocket.
-If the chain does not shift, turn adjusting screw 1 clockwise, i.e. adjust the cable
until the chain shifts onto the second sprocket.