Hase Spezialräder Pino, Руководство пользователя, Страница: 9 / 28

Steering
Handlebar
S P E Z I A L R Ä D E R
H
A S E
PINO
Page 9 As of 12.02
At the captains position at the rear, you can adjust the handlebar in
width, height , length and angle.
To adjust the width or height of the stainless steel handlebar grips, open
screw A and B. Now you can twist the handlebarends to the right length.
To adjust the height, just pull the handlebarends out to a suitable
position. The handlebarends must be insert over the whole black clamp
length, don't exceed this.
The handlebar angle and length can be adjusted to a sporty or relaxed
position. Open all 4 C screws and push the handlebar forward to a
sporty long position or backwards to a short upright and relaxed position.
Once a position is found, tighten all 4 screws firmly.
To adjust the seatgrips for the stoker in front, open screw D and force it
with a plastic hammer into the seat. Now you can turn the grip into a
upright position for short or down for tall people. In the upright position it
also stables the body of the stoker. The grips must be inserted in the seat
S P E Z I A L R Ä D E R
H
A S E
Screw A und B
Srew C (x4)
Screw D