Hase Spezialräder Pino, Руководство пользователя, Страница: 19 / 28

Spokes
Bolt torque settings
S P E Z I A L R Ä D E R
H
A S E
PINO
Page 19 As of 12.02
Spokes:
If spokes become loose or one of the wheels does not run true, the
wheel must be aligned.
If at any time the wheel is to be aligned in situ (frame or fork), it is
recommended that an alignment guide be used.
This could be, for example, an old spoke clamped to the frame or fork
and bent to the rim. This way any deformation of the wheel can be pin-
pointed.
If you aligne the wheel in a work stand, keep in mind that the wheel has
to be aligned 2,5mm to the left (discbrake). The Pino is build asymmetric
to get the same spoke angle on both sides. This will result in a stronger
wheel.
Bolt torque settings
The torque settings are determined according to specifications (Dubbel).
A torque wrench should be used when tightening.
Bolt quality 8.8
M5 5.5 Nm
M6 9 Nm
M8 23 Nm
If replace, only use bolt quality 8.8 or higher.
Before commencing any journey, check the bolts for tightness.