Hase Spezialräder Pino, Руководство пользователя

Страница: 18 / 28

Gear adjustment
S P E Z I A L R Ä D E R
H
A S E
PINO
Page 18 As of 12.02
Chainring
Outer chain guide plate
Innner chain guide plate
Adjustings krew L
Adjustings krew H
!
!
Low adjustment. Change the left and the right shifter to the first gear.
Then use adjustingskrew L to set the clearens between inner chain
guide plate and the chain to 0,5-1mm.
Cabeladjustment. For adjusting the index, change both shifters to
the first gear. The cabel should be just under tension. If it is to loose,
turn the adjusting nut at the shifter. Turn the adjusting nut, where the
cabel runns through, until the cabel is just under tension. Now turn
the cranks and chang to the second gear. The chain should runn
smooth to the middle chainring. Ones on the middlechainring it
should run without tuching the derailleur.
Caution:
Avoid cross gears, don’t ride extreme gears like first and
Adjusting the front
derailleur:
If you need to adjust the front
derailleur work like followed:
!
When carrying out adjustment, set
the chain to the largest chainring.
The outer chainguide plate must
be 1-3mm over the chain. Make
shure, that the outer plate, runns
parallel to the chainring. If not
loosen the derailleur-clamp and
push the derailleur into the right
position.
!
Topadjustment. The shifter is still in
the third gear and the right shifter
in the 9th gear. Use adjustingskrew
H to set the clearens between the