Hase Spezialräder Pino, Руководство пользователя

Страница: 17 / 28

Gear adjustment
S P E Z I A L R Ä D E R
H
A S E
PINO
Page 17 As of 12.02
Trouble shooting
Problem Cause Remedy
CHANGING GEAR
Chain slips o ff smal lest
sprocket onto frame.
-Adjusting screw H is
screwed out too much. Turn screw H clockwise
(diagram 17) until upper
jockey wheel is flush with
smallest sprocket.
Chain shi fts onto smal lest
sprocket with difficulty or
not at all. -Adjusting screw H is
screwed in too much.
-Cable too tight.
-Cable not operatin g
correctly.
-Turn screw H (diagram 17)
ant-clockwise until upper
jockey wheel is flush with
smallest sprocket.
-Turn a djusting screw 1
(diagram 21) clockwise (or
on right -hand gri p shifter )
until chai n shifts do wn with
ease.
-Check cable and lubricate
if necessary.
Chain slips off largest
sprocket in betwee n spokes
and sprock et, or chain
guide scrapes on spokes. -Adjusting screw H is
screwed out too much.
-Derailleur or chain stay
end defor med.
-Turn scr ew L clock wise
until upp er jock ey wheel is
flush with largest sprocket.
-Align or renew.
Chain shi fts up with
difficult y but shifts down
with ea se. -Cable too loose. -Turn a djusting screw 1
(diagram 21) anti-clockwise
(or on right -hand gri p
shifter) until chain shifts up
with ea se.
Chain shi fts down wit h
difficult y but shifts up with
ease. -Cable too tight.
-Cable not operatin g
correctly.
-Turn a djusting screw 1
(diagram 21) clockwise (or
on right -hand gri p shifter )
until chai n shifts do wn with
ease.
-Check cable and lubricate
if necessary.
Service and care:
Gear change:
Lubrica te cable an d deraill eur occasi onally. C lean and li ghtly lubr icate
chain and jockey wheels on derailleur as and when necessary.
Do not use a high-pressure cleaner as the grease will be forced out of the bearings by the
force o f the j et.
In case the trike is to be placed out of service for some time, select 9th gear on the grip
shifter to relieve spr ing pres sure.