Hasco H1250 Series, Руководство по эксплуатации

Страница: 6 / 14

6 HASCO hot runner
Switching off all the outputs or individual zones will not protect any of the outputs against hazardous
voltages!
Before working on the connected heating elements, the associated connections must be unplugged, or
the entire H 1250 control unit disconnected from the mains power!
Before the H 1250 is opened, it must be disconnected from the mains power!
4. Electrical connection
The H 1225/... power/signal cable is to be used for the power and thermocouple connections between the tool and the
control unit.
If all the control zones in the H 1250 /. . . are used, it is essential to observe the following:
Maximum power consumption
H1250/1x16 …. 3600 Watt
H1250/2x16 …. 7200 Watt
H1250/4x16 …. 14400 Watt
4.1 Pin diagram
H 1250/1/16 H 1250/2/16
H 1250/4x16