Hasco H1250 Series Скачать руководство пользователя страница 3

Instruction manual H1250

 

   HASCO hot runner   3 

 

 

 

 

 

 

 

 

Foreword 
Thank you for choosing a HASCO hot runner product. 
These operating instructions are intended for everyone who works with HASCO hot runner technology and explain how to 

safely handle HASCO hot runner products. 
These operating instructions must be read carefully by personnel whenever a product is brought into operation for the first 

time. They must always be readily available during operation. 
The operating instructions form the basis for the safe handling of HASCO hot runner technology. The instructions and 

information given here, and particularly the safety rules, must be followed under all circumstances. 
The general safety regulations and accident prevention regulations at the location in question must always also be 
observed by personnel. 
The operating instructions contain illustrations which serve for a better understanding only. In addition, the scope of 
delivery for special versions or the latest technical changes can lead to deviations from the actual version supplied. 
 
With this edition, all previous versions lose their validity. 

 

 

 

 

 

Read carefully prior to use  
and keep for future reference

 

 

 

 

 

Содержание H1250 Series















Отзывы: