HARWI ORCA 1850, Руководство пользователя

Страница: 13 / 79

13
ADJUSTING THE FRAME
In case one of the following
malfunctions occurs, the frame needs
adjusting.
a The vertical slide way cannot be locked
in the notches.
b The frame is twisted. (The panel is not
fully supported by the aluminium strips).
0 Overall drawing adjusting points (Fig. 8)
1
Position the vertical slide way near a
vertical support.
2 Loosen the horizontal bolt-nut connection
of the support (Fig. 9).
3 Check if the vertical slide way can be
moved easily from left to right.
4 If not, adjust the vertical bolts of the
support (Fig. 9). Check moving of the
slide way.
5 Secure the nut of the vertical bolts
without rotating the bolts.
6 Do not secure the horizontal bolt nut
connection at this moment.
7 Loosen the bolt nut connection of the
vertical supports without removing the
bolt and the nut (Fig. 10).
Fig. 8
Fig. 9
Fig. 10