HARVEY JIB MP250QM, Инструкция по эксплуатации

Страница: 8 / 39

7
move it to the selected location, and do not have fast motion change on the way.
4.3 Installation of the machine
Remove the protective coating of the machine and other parts of the machine with a
neutral machine tool or any similar solvent, do not use gasoline or similar solvents for
this operation, they may reduce the corrosion resistance of some parts of the machine.
The size of the working area depends on the type of the machine, the process to be
carried out and the size of the materials to be processed.
Do not forget to put the effective dust removal system and the space of the central
row of the dust connecting hose.
4.4 Working area
It is important to maintain a 0.8m free area around the machine, which is the
requirement of the workplace.
When process a long material, it is necessary to have enough space to be left before and
after the feeding and outlet place of the machine.
4.5 Fix and level of the machine
Foot adjustment is arranged at the bottom of the machine. The machine’s horizontal
position tolerance is 1/1000mm.
5 Connection of the dust removal
system
Operate the machine only in case of the dust
removal system running.
Open the switch of the machine and the dust
removal system at the same time.
The used exhaust hose diameter equals
100mm. The position of the dust discharge hose
connected to the row dust is as follows:
5.1 Planer
The exhaust mouth of the planer of the machine is in the space under the planer