HARVEY JIB MP250QM, Инструкция по эксплуатации

Страница: 4 / 39

3
factors around. And the highest levels allowed in different countries may be different.
This information can help users to evaluate the risk and risk rate in a better way.
3 Safety instructions
3.1 Outline
The machine is equipped with a variety of safety devices to protect the operator and
the machine tool. However, this does no cover all aspects of security, and therefore the
operator must read this chapter and fully understand this chapter before the machine is
put into use. In addition, the operators must consider other aspects of risk related to the
surrounding environment and materials.
3.2 Basic safety requirements
— Before connecting the machine to the main power supply, make sure all the safety
items are in the working position and check their working conditions, if necessary, to
remove the door or protective cover , cut off the main switch and lock it and cut off
the power supply.
— The holding back claw shall be free of movement, and its operation must be checked
regularly, perhaps several times a day.
— If the door and the protective cover are removed, the power must be cut off.
— In order to avoid improper operation, you must be familiar with the location of every
switch before starting the machine.
— Remember the location of the emergency stop switch, so you can use it at any time.
— During the machine operation process should pay attention not to touch any switch.
— Do not touch any rotating object with a bare hand or any other objects in any case.
— When work without using the machine, turn off the switch on the machine control
panel and cut off the power supply.
— Before cleaning the machine, turn off the switch and lock the main switch and cut off
the power.
— Before carrying out maintenance work inner the machine, turn off the switch and lock
the main switch and cut off the power.
— In the case of a number of people using the machine, do not have any work without
notice other people which function you want to use.
— Do not transform the machine in any way that may cause risk to the safe operation of
the machine.
— If you have any doubts about the validity of your program, contact the person in
charge.
— Do not ignore to do regular checks regarding to the use instructions.
— Check and make sure that the machine does not occur any damage caused by the user.
— After the work is finished, adjust the machine tool to make it ready for use in a series