HARVEY JIB MP250QM, Инструкция по эксплуатации

Страница: 14 / 39

13
Information
When slotting, it is necessary to drill a row of holes first, and then move the
worktable by control rod F, so the groove is completely cleared.
7.4 Protective auxiliary measures
When operating the planer and thicknesser, it is provided to wear apron and eye
protection. It is recommended to use appropriate ear protection and wear appropriate
shoes.
7.5 Operating prohibition
When operating the machine, the following circumstances are prohibited
：
—
Do any modification to the safety items of the machine without permission of the
manufacturer.
—
Perform any operation that is inconsistent with this manual security instruction.
— Touch the cutter body or its surrounding area and other running parts.
— Processing any material other than wood or wood based products.
—Use planer to machine the workpiece horizontally. The machine is designed for the
longitudinal direction of the wood fiber.
—When processing large semi-finished products, the power overload.
— Use hand or other object to remove the wood chips around the cutter while the
machine is working.
— Use tools that the machine manual
instruction not provided or recommended.
7.6 The installation and adjustment of
the blade
The blade size the cutter body accepts is
250mm×3mm×30mm. After sharpening, the
height size of the blade will reduce, but until
the blade height size to 20mm, the blades can
be used safely, then we must replace the blade,
because they cannot grip in the groove safely
anymore.
— As shown in the figure, install the cutter
adjuster in place.
— Use the special wrench C to loosen the lock screw, the compression spring in the