HARVEY JIB MP250QM, Инструкция по эксплуатации

Страница: 7 / 39

6
— Do not put any tools or other objects on the workbench or on the cover.
4 Transportation and storage
4.1 Transportation and storage
When transport or process the machine, to be very careful, complete by a qualified
person special trained for this.
When the machine loading or unloading, to ensure that no person or thing
under the machine.
When the machine is lifting by a crane or hoist, do not enter this area!
The transportation and storage of the machine must be protected from excessive
vibration and moisture.
The machine should be stored in a place with the temperature range from -25°C to
55°C.
According to the standard, the machine should be installed in the metal box and
transported by this way.
According to the requirements the machine can also be installed in a sturdy wooden
box.
4.2 The lifting of the machine
This machine and its each part can only be
lifted by qualified lifting device which have the
function of lifting.
Prepare a crane or similar equipment, do as
the next steps:
— Prepare two ring bolts and wire rope long
enough (the ring bolts are part of the delivery).
— Fix the ring bolts to the right bearing seat of the
planer-thicknesser.
— Fix the rope B to the crane hook A which have
the required strength.
— Check the stability of the machine hanging on
the rope B after lifting the machine slowly.
— Lift the machine slowly and carefully, and then