Harvard Apparatus Pump 33 DDS Скачать руководство пользователя страница 23

Страница: 23 / 60

Publication 5419-013 REV1.0

In Reciprocating Condition, the two syringe channels move in

opposite directions at the same rate using the same syringe size

and type. For example, when P1 is infusing, P2 is withdrawing at

the same rate. When combined with a valve box, the reciprocating

condition can provide the continuous fluidic delivery of a peristaltic

pump with the accurate, smooth, low flow rates provided by a

syringe pump.
Select “Reciprocating” from the Condition Select Screen.

The Reciprocating Condition Setup follows the same procedure as

Independent condition with one exception. The user only needs

to set the Mode Select, Syringe Select, Rate Select and Target

Select for the P1 Pump Channel and the P2 Pump Channel will be

automatically set.

Reciprocating Condition Setup

P33 DDS Condition Select Screen (Reciprocating Condition Selected)

Reciprocating Condition Setup Screen

1) MODE SELECT - Select the Mode for Pump Channel 1 & Pump

Channel 2. Reciprocating Condition will automatically set the

opposite mode for P2 once the user sets the P1 mode.

The two Modes are:

a. Infuse/Withdraw - The syringe will operate in Infuse/Withdraw

mode only. P1 will infuse first while P2 is withdrawing. Facing

the Pump 33 DDS, the pusher block for the infusing pump

channel will push the syringe plunger from left to right at the

set flow rate and volume/time while infusing and the pusher

block for the withdrawing channel will pull the syringe plunger

from right to left at the set flow rate while withdrawing. The

infuse and withdraw flow rates can be different. For example:

An experiment may require a low flow rate for infusion but

require a fast withdraw rate for quick syringe refill.

b. Withdraw/Infuse - The syringe will operate in Withdraw/Infuse

mode only. P1 will withdraw first while P2 is infusing. Facing

the Pump 33 DDS, the withdrawing channel will pull the syringe

plunger from right to left at the set flow rate while withdrawing.

The pusher block for the infusing pump channel will push

the syringe plunger from left to right at the set flow rate and

volume while infusing. The infuse and withdraw flow rates can

be different. For example: An experiment may require a low

flow rate for withdrawal but require a fast infuse rate for

quick delivery.

P33 DDS Reciprocating Condition Mode Select Screen

(Showing P1 Selection and P2 Setting)

Содержание Pump 33 DDS





























































Результаты поиска

Содержание Pump 33 DDS

Отзывы:

Похожие инструкции для Pump 33 DDS

Бренды по названию

Популярные бренды

Harvard Apparatus Pump 33 DDS, Руководство пользователя

Результаты поиска

Содержание Pump 33 DDS

Отзывы:

Похожие инструкции для Pump 33 DDS

Бренды по названию

Популярные бренды