A S S E M B L Y
STEP ONE
Attach the front [18] and rear feet [14] to the frame using the nuts [8], washer [9] and
bolts [10].
STEP TWO
Attach the handlebar post [22] inserting into the head tube on the frame. Use the release
lever to adjust and tighten the height in proper position. Then attach handlebar slider [23]
on the handlebar post [22], use release lever [17] to adjust and tighten the handlebar in
the proper position.
STEP THREE
Insert the seat post [43
] into the frame’s seat tube.
Attach the saddle [1] into seat slider
[42]. Insert the seat slider into the seat post and fix. Using release lever [6], adjust and
tighten the height in proper position.
STEP FOUR
Attach the pedals [11] into the crank arms [20 + 21], each pedal is marked with the L (left)
or R (right) to denote the side of the spinning bike they are on. Note: the right hand crank
is on the same side as the chain guard [19]. Be careful to align the threads correctly to
avoid any damage. A little grease on the threads should help the pedals to screw in easily
and correctly, tighten using a 15mm spanner; both pedal’s threads
should tighten towards
the front of the spinning bike.
STEP FIVE
To adjust the exercising resistance on the complete spinning bike, use the brake knob [24]
of brake system, and then simply loosen (-) or tighten (+).
The flywheel should rotate freely without resistance when you loosen (-) the brake system
totally.
