I N S T R U C T I O N S F O R U S E
The model HART PRO-79
is designed to be used as a “spin” cycle in fitness studios and health clubs. It has
a fixed wheel driven flywheel and should only be used under professional supervision.
Installation
–
it is important that the HART PRO-79 is correctly assembled and we recommend that suitably
qualified personnel carry out installation and assembly
HANDLEBAR AND SEAT ADJUSTMENT
It is important that the handlebar and seat are set at the correct height for your body. Ask your instructor
for assistance.
Adjusting the handlebar height
1.
Undo the release lever that is located where the H-bar post fits into the frame.
2.
Slide the handlebar post up or down to the required height and tighten the release lever.
3.
Make sure it is securely tightened and that there is no lateral or vertical movement of the handlebar.
4.
The handlebar position can also be adjusted forwards or backwards.
5.
Undo the Release lever located below the H-bar slider.
6.
Slide the handlebar assembly forwards or backwards until you reach the desired position.
7.
Then securely tighten the Release lever.
Adjusting the seat height
1.
Undo the release lever located where the seat post fits into the frame.
2.
Adjust the seat to the required height then tighten the release lever.
3.
Make sure it is tight enough to prevent the seat from twisting side to side.
4.
The seat position can be adjusted forwards and backwards.
5.
Undo the release lever located directly to the side of the seat slider.
6.
Loosen the release lever, slide the seat to the required position, then tighten the release lever.
PEDALS AND TOE STRAPS
Your feet should be securely positioned in the toe clips during the exercise. Put your foot as far forwards as
you can into the toe-clip and then pull the strap tight.
LEVEL SURFACE
The HART PRO-79 should operate on a level surface with no lateral movement. There is a height adjuster
pad located on either side underneath the foot tube. Turn these pads clockwise or anti-clockwise until the
bike is totally stable on the ground
EMERGENCY BRAKE
Press down brake system (24) for stop.
MAINTENANCE
It may be unsafe when bolts loosen on the parts of the flywheel or the flywheel becomes noisy, please
contact your supplier if this occurs. Like any other mechanical cycling device, the HART PRO-79 should be
regularly maintained. Please follow the enclosed maintenance chart.
