10 – English
OPERATION
MAINTENANCE
NOTE: ILLUSTRATIONS START ON PAGE 11
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which could result in serious personal
injury.
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts could create a hazard or cause
product damage.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
To avoid serious personal injury, always remove the
battery pack from the product when cleaning or
performing any maintenance.
SPEED DIAL SETTINGS
Type of Accessory
Application
Speed (x 1000)
Aluminum Oxide
Grinding Bits
Grinding nails/screws
32
Fiberglass Cut-off
Wheel
Cut bolts, screws, nails, thin wood
30
Sanding Drums
Sanding white pine
30
Felt Polishing Wheels
Polishing steel, aluminum, brass, stone, ceramic, glass
12-15
Drill Bit
Drilling holes into wood
32
Wire Brush
Brushing metal
15
Engraving Bit
Engraving soft metals
High speeds for woods,
slow speeds for metals
High-speed Cutter
Shaping curved surfaces
20-33
Conical Grinding
Stone
Grinding metal edges
32
