HARTCOM-W2 User Manual
4/2/2018
Designed and Produced under
Page 44 of 71
ISO 9001:2008 Certification
Step
Action
3
Select one of options for Poll address:
•
“use poll address 0 only” only searches at
poll address 0 before not finding a device. This is
the default setting.
•
“find first poll address” searches poll addresses until
it finds the first device it comes across.
•
“use poll address:__” If the poll address is know this options searches at a
specific address
(i.e. 5).
•
“search 0
-
15” searches poll addresses 0 through 15.
•
“search 0
-
31” searches poll addresses 0 through 31.
•
“sear
ch 0-
63” searches poll addresses 0 through 63
•
“search range
__ through__
” searches between a user identified range of pol
l addresses.
If using a
Wireless
HART adapter you can also click to select the devices default address, e.g.:
•
“MACTek Bullet –
15” searc
hes poll address 15.
•
“Emerson THUM
-
63” searches poll address 63.
•
Etc.
4
The Search by Tag option is grayed out when searching by poll address is selected. Select a search
by poll address option and Click OK to save the changed settings.
5
Click Yes if you want to save the changes. Clicking No will not save the changes.
6
Reconnect to a new device.
4.12.3.2 Short Tag
The
Search
menu can also be used to search by a specific Tag name or Description. To search for a device based on a
Tag name or a Description, perform the following steps:
