HARTCOM-W2 User Manual
4/2/2018
Designed and Produced under
Page 27 of 71
ISO 9001:2008 Certification
Step
Action
7
Click on the
Send
icon
to commit the changes to the device.
After being sent the change is reflected in the device info.
4.3.4 Executing Methods or Standard Operating Procedures
Methods are defined in the DD file for the device that DevCom2000 is connected to. You can select the Method and
execute it for calibrating the device, trouble shooting, etc. Method execution leads you through a number of steps,
like in a wizard.
A Few examples of methods include:
•
Setting high and low range calibration points
•
Calibration of the device
•
Run the advanced diagnostic test procedure
•
Execute tests to gather information on device operation. To execute a Method, perform the following steps:
Step
Action
1
Follow the steps in section “6.2 Viewing device configuration” to view the device parameter(s) you
want to change,
select the parameter where the method is present and double-click to open
it.
