14 |
P a g e
Platform Handrail Assembly
1.
Per application drawing, install standard rails
and secure with provided 2” bolts, washers,
and
1/2”
nut. When installing platform
handrails, ensure the flat side of the wheel
guard is facing in towards the ramp surface.
Turning platforms will appear as illustrated
while a straight platform will have rails on the
opposite sides of each other.
2.
If installing a turning platform, you must assemble the
90-degree closure kit before mounting both rails.
Assemble closure kit as shown and secure with
provided self-tappers. Install assembled closure kit
into handrail previously secured to platform. Aligning
both the upper and lower tubes, slide the remaining
handrail onto the closure kit. Secure handrail with
provided 2” bolts, washers, and
1/2”
nut. Secure closure
kit to both handrails with provided self-tapping screws.
The connection between platform handrail and ramp handrail
will require measuring and cutting on site.
04OCT19 | 630-00103-01 Rev B
