Harmar Mobility HIGHLANDER II, Инструкция по установке и обслуживанию

Страница: 39 / 44

HIGHLANDER II VERTICAL PLATFORM LIFTS:
Install Manual
17FEB2021 | 630-00113 REV C
39
MAINTENANCE
HIGHLANDER II: SECTION 7
SECTION 7
MAINTENANCE
& INSPECTION
Annual inspections are highly recommended to help
prevent unsafe conditions and operation.
RESIDENTIAL
APPLICATIONS
OWNER / MAINTENANCE PERSONAL
BEFORE USE
Do not use lift until these conditions are rectified.
• All doors and gates are locked and secure.
•
Check for standing water around the unit.
• Make sure the AC connections are in good
condition and that there are no cracks or gaps
in conduit.
•
Make sure there are no obstructions intruding
in the path of the lift.
−
People, tree branches, loose items, etc.
• Check that there is no loose hardware or
emerging cracks/deformations in the platform
and tower. Make sure that there are no unusual
noise or vibrations that develop.
PERIODICALLY
•
Check and ensure that the safety pan under
the platform moves freely up and down and is
not damaged. This is the built-in safety device
designed to detect obstructions under the
platform and stop platform downward motion.
If there is an easy-to-remove obstruction, please
remove it. If for any reason the safety pan does
not move as intended, please contact your dealer.
• Check and ensure that all labels are intact and
legible. If any safety or warning labels need to
be replaced, please contact your dealer.
•
Make sure you have a copy of the Owner’s
Manual. A digital copy of the Owner’s Manual is
available at harmar.com.
• Check your key locks and emergency stop
button for functionality.
•
Check for any rust that may be developing.
Rust is expected in outdoor applications
(especially in coastal areas), but with proactive
maintenance or quick repair, this can be
minimized.
COMMERCIAL
APPLICATIONS
END-USER/MAINTENANCE
PERSONAL
IMPORTANT
Understanding State/Local Inspection Requirements
and Timing - Always Required.
BEFORE USE
Do not use lift until these conditions are rectified.
• All doors and gates are locked and secure.
•
Check for standing water around the unit.
• Make sure AC connections are in good
condition and that there are no cracks or gaps
in conduit.