Harman The Serenity III HB 38 DV, Инструкция по установке и эксплуатации

Страница: 40 / 54

40
MAINTENANCE
Air In
Air Out
The flow of combustion and ventilation air
must not be obstructed
Oil Holes
Cleaning the Burners
To clean the burners, the face, glass front, and logs must
be removed. Remove the front burner assembly and
rear burner as described on page 29. Remove the front
burner from the assembly by loosening the clamping
plate on the bottom.
With both burners removed, inspect all of the holes to
make sure they are unobstructed. Use a small drill or
wire to clean any obstructed holes. Remove any rust or
other buildup that may have accumulated.
Replace burners in reverse order.
Lubrication
The Serenity Fireplace does not require lubrication
other than the blower. One or two drops of light oil may
be put in the two oil holes on the blower motor. This is
not critical and should only be done every year or two.
Too much oil is worse than no oil.
Air Flow
It is essential that air flows freely into the bottom grill
and out of the top grill. Do not place objects in front of
the grills.
Check blower annually for buildup caused by dust and
pet hair.