Harman The Serenity III HB 38 DV, Инструкция по установке и эксплуатации

Страница: 4 / 54

4
Introduction
Due to high temperatures, the Serenity III
Direct Vent Gas Fireplace should be located out
of traffic and away from furniture and draperies.
Children and adults should be alerted to the
hazards of high surface temperatures and should
stay away to avoid burns or clothing ignition.
Young children should be carefully supervised
when they are in the same room as the appliance.
Clothing or other flammable materials should not
be placed on or near the appliance.
Surveiller les enfants. Garder les vetements, les
meubles, lessence ou autres liquides a vapeur
inflammables lin de lappareil.
This appliance may be installed in an aftermarket
permanently located (mobile) home, where not
prohibited by local codes.
This appliance is only for use with the type(s) of
gas indicated on the rating plate. This appliance is
not convertible for use with other gases, unless a
certified kit is used.
Cet appareil peut etre installe dans un maison
prefabriquee (mobile) deja installee a demeure si les
reglements locaux le permettent.
Cet appareil doit etre utilise uniquement avec les
types de gas indiques sur la plaque signaletique.
Ne pas l utiliser avec d autres gas sauf si un kitde
conversion dertifie est installe.
Any safety screen or guard removed for servicing
an appliance must be replaced prior to operating
the appliance.
When operating your Harman Serenity III Gas
Fireplace, respect basic safety standards. Read these
instructions carefully before you attempt to operate
the fireplace. Failure to do so may result in damage to
property or personal injury and may void the product
warranty.
Consult with your local building code agency and
insurance representative before you begin your
installation to ensure compliance with local codes,
including the need for permits and follow-up inspections.
Several issues must be addressed when selecting a
suitable location for your Serenity III Gas Fireplace.
Observing required clearances to combustible materials,
the proximity to a safe venting system location, and
the accessibility of the gas and electrical supply must
all be considered. In addition, selecting a location that
takes advantage of the building’s natural air flow is also
desirable to maximize the heating effectiveness of the
fireplace. In many cases, this is a central location within
the building.
The Harman Serenity III Direct Vent Gas Fireplace
is a listed gas-fired direct vent room fireplace tested
by Intertek Testing Services/Warnock Hersey to ANSI
Z21.88-2002-CSA 2.33-2002. CAN-CGA-2.17-M91.
Also approved for installation into a shop.
The installation of the Serenity III Direct Vent Gas
Fireplace must conform with local codes, or in the
absence of local codes, with National Fuel Gas Code,
ANSI Z223.1 — latest edition and CAN 1 B1-149.1 and
.2 Installation Code.
Also for use in mobile (manufactured) homes after
home is sited.
Mobile (manufactured) home installations must adhere
to current editions of Title 24 CFR, part 3280, or CSA
Z240.4.
CAUTION: This appliance must be vented to the
outside.
Installation and repair of the Serenity III Direct Vent
Gas Fireplace should be done by a qualified service
person. The appliance should be inspected before use
and at least annually by a qualified service person. More
frequent cleaning may be required due to excessive lint
from carpeting, bedding material, etc. It is imperative
that control compartments, burners, and circulating air
passageways of the Serenity III be kept clean.