manualshive.com logo in svg

Harman Soundcraft Si impact, Руководство пользователя

Поделиться
Скачать
Harman Soundcraft Si impact Скачать руководство пользователя страница 73

User Manual

7.4: GRAPHIC EQ (GEQ)

DSP ELEMENTS > GRAPHIC EQ (GEQ)

7.4: DSP ELEMENTS > GRAPHIC EQ (GEQ)

GEQ HI

Press to assign the 14 'high' GEQ bands (800Hz - 16kHz) to the Control Channel Faders.

An output channel (Mix Bus, Matrix Bus, LR / Mono bus masters) must be selected for this button to have any 
effect.

GEQ LO

Press to assign the 14 'low' GEQ bands (31Hz - 630Hz) to the Control Channel Faders.

An output channel (Mix Bus, Matrix Bus, LR / Mono bus masters) must be selected for this button to have any 
effect.

ON (red)

Lighted red to indicate an active (non-zero) GEQ band. Press to 'zero' that band.

This ON button mode is only active while GEQ is assigned to the faders.

CLR + GEQ

'Zero' all bands in the active GEQ.

Hold CLR and press either the GEQ HI or GEQ LO buttons to 'zero' (set to 0dB) all bands (both high and low).

FADER

Adjust the level of the assigned GEQ band.

The GEQ scale is shown on the left of the fader - +/-15dB, above and below a centre detented 0dB position. GEQ 
FaderGlow is Red. The centre frequency of each band is shown in the Channel Name LCD.

Содержание Soundcraft Si impact





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды