manualshive.com logo in svg

Harman Soundcraft Si impact, Руководство пользователя

Поделиться
Скачать
Harman Soundcraft Si impact Скачать руководство пользователя страница 41

User Manual

6.1: INPUT CHANNELS

CHANNELS & BUSSES > INPUT CHANNELS

6.1: CHANNELS & BUSSES > INPUT CHANNELS

Input channels receive either external input from instruments, microphones, and so on, or they receive 
input from the internal Lexicon FX units (FX Return - Stereo Input Channels 1-4).

Input channels can be mono (64 available: CH 01 - CH 64), stereo (4 available: ST 1 - ST 4 - FX Retunrs by default), 
or mono-linked (assigned in odd/even stereo pairs of mono Input Channels), and can be patched to any microphone, 
line, or digital inputs. Mono inputs do not have a FaderGlow colour. Mono-linked channels use FaderGlow white, and 
Stereo FX returns from the internal FX units use FaderGlow cyan. If patched externally, stereo input channels use 
FaderGlow pink

Input channels can contribute to any or all of the MIX 1-14 Mix busses (which feed the Mix Bus Master channels), the 
Main L&R and Mono/Centre mix busses, or to the FX send busses - which get routed to the internal Lexicon FX. There 
are three ‘taps’ for these bus contributions - Pre Dyn (Pre Dynamics), Post EQ, and Post Fader.

The levels of these contributions are accessed via the tOTEM buttons.

Please note, Input Channels can not contribute to the Matrix (MTX) busses, so the MTX FADER FOLLOW buttons are 
not applicable for Control Channels assigned to Input Channels.

There are various input-specific options, found via the Touch Screen Main Menu INPUTS button. These offer 

 

channel naming, linking, Pre/Post routing options for Mix busses and direct outputs, and physical input and Direct 
Output patching. See section 6.1.1.

NOTE: For LCR Panning,  LCR Panning Mode must be set in the INPUTS & VCA Menu. The Mono output patch is the 
Centre output patch, and Mono routing must be enabled in the ACS (Assignable Channel Strip) OUTPUT section with 
the MONO button (can be done in Interrogate mode for speed).

Содержание Soundcraft Si impact





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды