manualshive.com logo in svg

Harman Soundcraft Si impact, Руководство пользователя

Поделиться
Скачать
Harman Soundcraft Si impact Скачать руководство пользователя страница 38

User Manual

5.4.1: MADI-USB SET-UP

INPUTS AND OUTPUTS > MADI-USB CARD > SETUP

5.4.1: INPUTS & OUTPUTS > MADI-USB > SETUP

DIP Switches - Card Configuration

DIP switches on the card provide extra flexibility depending on the 

application.

The standard (factory) configuration is as follows: 

DIP 1 OFF: Master (Internal) Synchronisation
DIP 2 ON: 32 USB Out (channels 32-64)
DIP 3 OFF, DIP 4 ON: 32 USB In (channels 32-64),  32 MADI In 
(Channels 1-32)

This allows for 32 USB inputs and outputs for PC and Mac recording 
and playback, plus 32 MADI inputs and 64 MADI outputs (for connec-
tion to a Soundcraft Stagebox, for example).

DIP Switch 1: Sync - Master / 

Client

This alters the syncing interaction between the MADI-USB Combo card and the mixer. As standard, the 
card should be set to sync to the mixer and so, switch 1 should be set OFF. To connect two consoles 
together using two MADI-USB Combo cards, for a master/

client

 type operation, the card within the 

master console should be set to sync to the Mixer (switch 1 OFF), and the 

client

 console/card set to sync 

to the Card (Switch 1 ON). The consoles will then need to be set to INTernal and OPTion clocking 
respectively.

DIP Switch 2: USB Out Range

This determines what channels (console output paths) the USB is sent out from on the USB portion of the 
option card. OFF is channels 1-32, ON (default) is channels 33-64.

DIP Switches 3 & 4: USB / MADI In Range

Together these switches determine the input range and positions of the MADI and USB streams. You can 
also set the card to 64 channels of MADI in using these switches.

3 OFF 4 OFF: Input Channels 1-64 MADI (no USB in)
3 OFF 4 ON (default): Input Channels 33-64 USB, Input Channels 1-32 MADI
3 ON 4 OFF: Input Channels 1-32 USB, Input Channels 33-64 MADI
3 ON 4 ON: Input Channels 1-64 MADI (no USB in)

Содержание Soundcraft Si impact





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды